برد کنترل گیمبال سه محور SBGCV3.0- Plastic DYS

AlexMos 3 axis 32-bit Simple BGC 

This AlexMos SimpleBGC Brushless Gimbal Controller is fully assembled and ready to use board with latest firmware designed by Alex Moskalenko. 

Basic functions of Controller

• 32-bit MCU — ARM Cortex M4. Effectively calculates the complex tasks for 3-axis stabilization.
• Allows camera control with the RC or analog joystick.
• Use several switchable profiles for different modes of operation
• Supports variety of RC protocols: PWM, Sum-PPM, spektrum and s-bus.
• Battery voltage monitoring, compensating voltage drop in the PID-regulator.
• Low battery alarm (output to 5V active buzzer).
• Increased number of inputs for controlling signals + 3 additional reserved input/output AUX1-AUX3.
• Can supply up to 1A current for external devices on the 5V power line.
• Dedicated UART-socket to connect optional Bluetooth module
• Reverse-polarity protection, overheat and overcurrent protection
• USB interface for the PC connection, to configure, control and upgrade firmware.
• Graphical user interface to manage the settings. Windows / OS X / Linux versions.
• Control through the Serial-protocol using dedicated API.
• Improved attitude estimation algorythms
• Optional second IMU, that will increase the short-term precision of the stabilization 10x-30x times and will make stable work in any frame position.

Specifications:

• Size of the board: 50×50 mm
• Distance between the mounting holes: 45 mm
• Diameter of the mounting holes: 3 mm
• Power supply voltage: 8–25 V (3s-5s LiPo)
• Maximum motor current: 1,5 A
• 5V output current to power external devices: up to 1 A

Include:

• AlexMos 3 axis 32-bit Simple BGC  
• 2pcs of IMU6DOF MPU6050
• Connection plugs welded 2.54mm
• Sensor wire