The ALENTECH PLUS can install to most DJI products that which include: DJI SPARK / MAVIC PRO / PHANTOM 3ADVANCED / 3PRO / 4 / 4ADVANCED / 4PRO / INSPIRE 1 / 2 / M200 / 600 and more than including transmit power is 2.4G products.
We believe ALENTECH Signal Booster Plus amid makes an edge tool for your drones that Anti interference and stable transmission and secure flight protection. controllable distance of more than 10 kilometers. 100% do not damage your remote control installation also pluy and play. Battery can be replaced at any time, full of electricity, can work continuously for more than 5 hours.
DESCRIPTIONS
Product specifications:
▲ work frequency band: 2.4 ~ 2.5GHz
▲ working voltage: 7.5V
▲ Receive gain: 10dB ± 1
▲ Transmit gain: 15dB ± 1
▲ input power range: 3 ~ 20dBm
▲ Maximum output power (P1dB): 4W (36dBm)
▲ EVM: 3% @ 28dBm 802.11g 54Mbps OFDM 64QAM BW 20MHz
▲ operating current: 435mA @ Pout 28dBm 9V
▲ noise figure: ≤ 2.5dB
▲ transmission delay: ≤ 1us
▲ Operating temperature: -40 ℃ ~ 80 ℃
Working principle:
Launch:
Interface 1 receives an external source signal, such as AP, after the RF switch, passed to the attenuator, the attenuator will be secondary signal output to the two power amplifiers, and finally passed to the output of the RF switch, and finally sent to the antenna port.
Receive:
Interface 2 through the antenna to receive the space signal, after the RF switch, the low noise tube, the low noise tube will output the signal to the filter, and finally passed to the input RF switch, and finally sent to the interface 1.
Break the flight limit
We have been tested, the product of remote control and map transmission effects are excellent, the reliability of the product. In the city where the signal interference is strong can still fly nearly 6000 meters long distance, in the open suburbs is more than 7,000 meters, but to ensure that the aircraft free time, do not wait for the power to fly before returning ah!
Scope:
MAYIC PRO \ PHANTOM 3 ADVANCED, PHANTOM 3 PROFESSIONAL, PHANTOM 4, PHANTOM 4 PRO INSPIRE 1, INSPIRS PRO, INSPIRS RAW, INSPIRE 2, M200, M600