فلایت کنترل F3 Raptor390 به همراه اسپیدکنترل و OSD داخلی

Power using powerful C8051F390 MCU, 8-bit C8051 core, operating frequency up to 50MHz;

ESC uses a dedicated 3in1 driver IC, faster response, smaller and lighter. ESC supports up to 400,000 rotate speed;

Auto power on the throttle signal detection, support the general throttle mode 1-2ms pulse width input, onshot125 (125-250us), oneshot42 (41.7-83.3us) and multishot (5-25us);

BLHeli open source program can be used to upgrade or change the parameters through the signal line; select Damped Light mode, more efficient, significantly improve the throttle response speed. Throttle changes from lager to small, the motor deceleration response more quickly, multi-rotor stability and flexibility has been significantly enhanced, especially for use across the machine;

The shortest two-story tower structure; between the ESC and flight control pin connection with the shortcut, so that the whole lighter weight, installation faster and more convenient to minimize the interference generated by signal transmission, the flight more stable;

F3 flight control support PPM, PWM, SBUS, etc. The most mainstream remote control / receiving mode;

Integrated with OSD, integrated 5V, 12V and battery voltage (BATV), to facilitate the figure pass, camera, buzzer, LED lights and other peripheral power supply; all plugs are equipped with a cable, to your unprecedented installation experience;

Flight control through the USB connection to the computer through the flight control parameter adjustment software, you can directly transfer power to adjust the software or adjust the settings;

A variety of parameters can be set so that the ESC can operate in most violent configuration, even if the default settings can also be excellent in the normal configuration of the operation.